Getting To The Point –

Excellent Means Of Protecting Your Hardwood Floor From Termites During Refinishing

Termites are usually useful for nutrient cycles and also bring major loses in wood structures among many other valuables. Most victims of termite destruction are hardwood floors. When a hardwood floor is fixed properly, during fresh construction or when refinishing, it is highly unlikely that you will need termite control services later on. This article provides the physical means of termite control that will help to protect your hardwood floors from damage by termites.

The top step in refinishing hardwood floors involves observing the floor and paying more attention to the gaps between the floor planks. The essence of this step is to spot any pests, and especially termites under the floor. Termite control will be necessary if you observe any signs of termites. While observing, you will be able to tell the kind of floor you are working on. Different kinds of wood pose different levels of difficulty in refinishing. You should then begin the refinishing process after you are certain that you can refinish your hardwood floor.

The next important termite control procedure in refinishing hardwood floors is conducting an adhesion test. You should set apart a small area of the floor for conducting the adhesion test. It involves thoroughly cleaning the floor that you are operating on with a floor cleaner. What follows after that is sanding the area using a sanding screen then clearing the excess residue from the area. The dust-free area is then ready for the application of a coat of polyurethane. You can look at the area after around twenty-four hours. The area where you applied termite control polyurethane coating should be polished apart from the few whiskers caused by dust. You can then press down on the surface using medium and even pressure to confirm that the solution will adhere properly.

You should then collect all the necessary flooring equipment that you will use. Such materials include termite control edge sander, hammer, pliers, nail set, box fan, painter’s tape, work gloves, safety glasses, hearing protection, breathing protection, industrial grade vacuum cleaner, polyurethane floor sealant, power floor buffer and wide-blade dull putty knife. You can easily find the aforementioned materials at your neighbors or buy from home improvement store near you or online.

The last three steps in refinishing your floor involve cleaning, buffering and adding the finish respectively. Cleaning helps the floor to come out flawless. You should change the surface of the sanding screen facing the floor after ten to fifteen minutes because after that it will lose its sanding capability. After buffering the floor, you should ensure that you get rid of any dust prior to doing the finish. Polyurethane is among the simplest to use floor finishes.

Researched here: visit this site